Home>News
As administrative divisions have been stagnant, citizen spending has been widespread. Products made of stainless steel materials have long service life, not easy to rust, pickled, health care, gree...
Horizontal Split Casing Centrifugal Pump is a common machine that has been standardized and serialized. When production requires, the appropriate model and specification of the pump should be selec...
What are the requirements for the installation location of the Single Stage Double-Suction Centrifugal Pump ? 1. Minimize the installation height; 2. Minimize the length of the inlet pipe and the n...
Centrifugal pumps are corrosion-resistant centrifugal pumps commonly used in industrial production. Fluoroplastic centrifugal pumps are suitable for transporting corrosive solvents such as acid, al...
There is a rotating handover gap at the joint between the outer edge of the suction port of the impeller of the fluoroplastic centrifugal pump and the inner wall of the pump casing, and the two sid...
1. In the first cooling form, the clean medium conveyed by the outlet or high pressure end of the centrifugal pump directly flushes the sealing end face and then enters the pump cavity, and the fri...
Features of small flow high head submersible pump: 1. The motor and the water pump are one body, submerged in the water to run, no sparks, explosion-proof, safe and reliable. 2. There is no special...
Structural features 1. The high-lift submersible pump adds an axial load carrier between the pump and the motor, and the lift can be increased to 2500m. 2. The motor winding is nylon sheathed polye...
The first measure is to install a suction bottom valve at the end of the suction pipe of the submersible pump for the well. In theory, the suction bottom valve is a check valve, which ensures that ...
For the use of high-lift submersible pumps, we mainly drain water, so I believe many of them do not understand the control of water output and water flow. Next, I will explain the various adjustmen...