The rear pull-out design enables the bearing pedestal including impeller and shaft seal to be removed with the volute
The rear pull-out design enables the bearing pedestal including impeller and shaft seal to be removed with the volute
Type DG pump is a kind of single-suction, segmental, and multistage centrifugal pump. It is suitable for pumping the
Taco TC Vertical Split Case Pump, 5" (125) mm Suct, 3" (80) mm Disch, 8" Nom Imp Dia, 1750 RPM (4 Pole), ODP, 10 HP, Starting Option = Across the Line, 230/460/60/3 Usable At 208, 40 Deg C...
VSX-VSCS Bell & Gossett Vertical Split Case Pump Model 6x8x10-1/2B, rated for 1000 GPM, 80’ TDH, 9.25” Impeller, LHR, 40HP 1780/200/3/60 TEFC 324T...
The Split Case Pump casing is split horizontally or vertically depending on the type of pump, for maintenance. Suction and discharge flanges are opposed to each other. Usually designed to mount...
If the shaft is upright, it is know as the vertical split case pump. The horizontal split case pump is the most common type due the easy installation and maintenance. Single stage split case and...
XS Split Case Pump. KDY Multi Stage. SLZ Vertical Split Case. Sea water(2205/2507) ESF Ul listed. Diesel engine drive. Fire package. Single stage pump. NIS end suction. NISO end suction. ZS Mono...
Model 413C is Vertical Chair-Mounted. Design Recommended Where Floor Space is Limited and Possible Flooding Chances are Marginal. Vertical Split Case Pumps Require Half the Floor Space of a...